Fine as it is (Carb)

Weeping has stopped. Fitted an extra layer of gasket paper and tightened down. All fine. Realised that float was previously fitted UPSIDE DOWN! (from one of the "before" pictures) So even the small dent on the top means it is functioning at least as fine as it was before. Not fully correct as the petrol level should be low enough to not really need to worry about extra layer of gasket. But it's done the job.

Re-stripped and cleaned out ALL jets and refitted. Seems fine, although not quite as fine as before. Something else is slightly amiss. Not sure what yet. It was slightly better BEFORE I fitted the new gaskets and cleaned the bowl out thoroughly.